Cam Lock Special Cams Mounting Hole Dimenions
Posted by Joe L, Last modified by Joe L on 13 August 2014 12:55 PM
Mr. Lock stocks 4 styles of cams for cam locks.
The most common mounting hole is shown in the following image:
This particular mounting hole dimension measures approx. 0.343 -> 0.348 (~11/32) inches, and is normally found on ESP, Fort, and LSDA style cam locks.
Click Here for standard ESP Cams
The square cut out in the CCL Security cam is approx .315->.320 inches. This cam in normally used on the B157xx series cam locks. Some of CCL imported, competitve series cam locks may use a different size - measure carefully.
Click Here for CCL Security Cams - scroll to bottom of page.
Compx National, standard flat key cam locks will have a square cut out that is approx 0.280 or 9/32".
Click Here for Compx National Cams
High security cam locks such as tubular key types, Medeco, Mul-T-Lock, Abloy and others use cams with cut out similar to:
Click Here for above style security cams.
Reference Keywords: Cam Lock Hole, Cam Hole, Cam Size, Mounting Hole, Mounting Dimensions