Shopping Cart 
Checkout
Knowledgebase
Do you supply keys for Contico locks or replacement locks?
Posted by Joe L on 01 September 2010 03:15 PM

We currently stock the following plunger push-in style lock set:

Contico Plunger LocksContico Plunger Locks

At this time we do not have access to key code information for Contico brand toolbox, thus we cannot supply pre-cut keys for the Contico brand locks.

We do stock a replacement lock for some older model Contico locks. This lock does not fit all Contico products as Contico used several different lock manufacturers over the years.


Please review the specifications on Push-in Toolbox locks. <--- Click Blue Link for more information and pricing.

 

 


 

We have been unable to source manufacturers on the following locks:


Unknown Contico LockUnknown Contico Lock

Unknown Contico Lock

 

If you are aware of a source for these locks, please let us know.

(120 vote(s))
This article was helpful
This article was not helpful

Comments (24)
Luis G
06 November 2011 01:10 AM
I need two sets of locks for a tool box tuff box of contico. Thank You
Joe
06 November 2011 03:30 PM
Please review the link above for lock dimensions and specifications (Click the Blue Highlight Text) - Our sku 27050 will fit SOME Contico locks - not all - they have used several models over the years.
Don
02 December 2011 10:03 AM
How do you handle orders to Canada for ulr-1062std s?
Joe
02 December 2011 12:49 PM
Add the item you need to your shopping cart, click checkout and following the process until you get to the page with shipping options - this will be before you enter any credit card details. We normally ship via USPS Global Mail to Canada on small orders.
Please review our international ordering requirements here:
http://support.mrlock.com/index.php?/Knowledgebase/Article/View/4/2/international-shipments--credit-card-policy
Jim D
26 June 2012 05:03 PM
I have a contico work box 60 inches long with 2 lids. In one of the lids, the latch mechism (1 5/8" long) mounted in the top of the lid is broken off. It is the male part that fits into the push button plunger lock mechism located on the lower front panel. What is the part number, and, can you supply this item?????
Joe L
28 June 2012 02:59 PM
Currently, the only parts we have is our sku 27050 shown at the top of this page - we have no mechanism repair parts.
Mark M
24 October 2012 10:29 PM
how do i know that this will fit my Contico toolbox?
Joe L
26 October 2012 08:58 AM
Regarding dimensions, please visit the following page:
http://www.mrlock.com/27050.html

Click on the images for lock dimensions to determine if it will fit your application. Contico has used various locks over the years. 27050 is a plunger type lock that pushes to release the latch.
Steven Parrish
27 February 2016 05:05 PM
Looking for the square back tuff box for the contigo box. If someone might seen this style please email me thanks.
Michael
06 April 2016 02:47 PM
Have you ever found the black plastic lock like you have pictured on this page. (Bottom picture) I have one with no keys and is pretty corroded. So I really need one or one that would work as I don't think this one will work and I am having a hard time finding a key that will fit it to have cut for it. None of the lock smiths around here has that key in stock to cut. There is a 1" diameter hole in the box and so it has to be a pretty large lock. I don't care if it looks like that or not as long as it would work. Most I find are 1/2" and not long enough for the catch. Any ideals? Thought about putting a metal plate over the hole and drilling a smaller hole and using a lock I can easily find instead. Your thought? Thanks Michael
Joe L
13 April 2016 07:47 AM
No idea for source on locks other the the top push-in plunger locks.
Barry Decko
29 April 2016 06:20 PM
The plastic lock is off a contico pu truck box late 80s with the locks to the rear vs sides. I have one and need one as one side is broken.
Joe L
02 May 2016 03:36 PM
Currently, the only lock we have access to is the plunger lock shown at the top of this page.
Ron
17 October 2016 11:45 AM
Looking for keys for a contico lock no. C50
Drew M
17 November 2016 06:59 PM
Havs their been a source found for the square plastic lock, 2nd lock pic on this page ?
Joe L
18 November 2016 08:33 AM
Contico C50 - Contico has not supplied/released code information on these locks. We can hand fit keys if you send us the lock. Please contact our sales department for a quote if you send in your lock.
Joe L.
18 November 2016 08:34 AM
Regarding the square plastic lock, as of Nov 2016 we have not found a source on this lock.
Don Macken
17 February 2017 06:54 PM
Need lock for existing pro tuff box. It is the third lock shown above, the one on the second line by itself... wing like outside handle. Thanks.
daniel morgan
15 March 2017 03:54 PM
I need key and lock for a pro tuff tool box it has the plastic hook on it to hold the top down and you can lock it with the key do you know where i can get one at
Glen Alleman
30 March 2017 01:40 PM
Will these locks fit an older model black plastic Contico truck storage box with L70 stamped on the lock? Is so, I want to order a pair
Sonny Bowen
21 April 2017 08:49 PM
I need the bracket, latch and spring for the first lock you have pictured. I have the plunger lock. Any ideas?
Joe L.
24 April 2017 08:44 AM
Please review the dimensions of the lock shown on this page:
https://www.mrlock.com/27050

At this time this is the only lock for older Contico boxes we have been able to locat.
Joe L.
24 April 2017 08:46 AM
Please review the dimensions of the lock shown on this page:
https://www.mrlock.com/27050

At this time this is the only lock for older Contico boxes we have been able to locate. We have been unable to source any of the associated latching mechanisms.
Joe L.
24 April 2017 08:49 AM
In regard to keys for locks, please use the following contact form to send us details of the lock box brand and key numbers:
https://www.mrlock.com/support/index.php?/Tickets/Submit
Post a new comment
 
 
Full Name:
Email:
Comments:
CAPTCHA Verification 
 
Please enter the text you see in the image into the textbox below. This is required to prevent automated registrations and form submissions.

Help Desk Software by Kayako Fusion